Extenders for various applications

Due to its high purity, whiteness and brightness Crystal Quartz Sand from Schlingmeier is an ideal extender for synthetic resin bonded materials. The mechanical properties such as impact hardness, bending and tensile strength, compression strength, and the modulus of elasticity, can be improved. The coefficient of linear thermal expansion decreases. Shrinkage and increase in temperature during hardening can be reduced. Furthermore, both acid and alkali resistance can be increased. As quartz can be considered inert towards synthetic resin bonded materials, the working time is not affected.

The following table shows selected grades which are preferably used as extenders. All dry sands (T) can be supplied as blended grades. Please let us know your required grain size distribution.

Crystal Quartz Sand	d - D mm	d₅₀ mm	AFS	Spec. surface (calculated) cm²/g	Typical applications
G 0-0,3T	0,1 - 0,3	0,21	65	115	Industrial flooring on resin base, acid and alkali resistant drain-pipes and conduits, street marking paints, fillers, surfacer and sealing mass, coatings for corrosion protection, abrasives, polyurethane coatings, polymer cement concrete, air and water permeable surfaces in footpath construction etc.
G11T	0,1 - 0,4	0,22	61	107	Industrial flooring on resin base, acid and alkali resistant drain-pipes and conduits, street marking paints, fillers, surfacer and sealing mass, coatings for corrosion protection, abrasives, polyurethane coatings, polymer cement concrete, air and water permeable surfaces in footpath construction etc.
G20T	0,1 - 0,4	0,26	54	92	Industrial flooring on resin base, acid and alkali resistant drain-pipes and conduits, street marking paints, fillers, surfacer and sealing mass, coatings for corrosion protection, abrasives, polyurethane coatings, polymer cement concrete, air and water permeable surfaces in footpath construction etc.
G23T	0,1 - 0,6	0,29	50	84	Industrial flooring on resin base, acid and alkali resistant drain-pipes and conduits, street marking paints, fillers, surfacer and sealing mass, coatings for corrosion protection, abrasives, polyurethane coatings, polymer cement concrete, air and water permeable surfaces in footpath construction etc.
G30T	0,1 - 0,7	0,37	41	68	Industrial flooring on resin base, acid and alkali resistant drain-pipes and conduits, street marking paints, fillers, surfacer and sealing mass, coatings for corrosion protection, abrasives, polyurethane coatings, polymer cement concrete, air and water permeable surfaces in footpath construction etc.
S30T	0,2 - 0,8	0,43	36	58	Industrial flooring on resin base, acid and alkali resistant drain-pipes and conduits, street marking paints, fillers, surfacer and sealing mass, coatings for corrosion protection, abrasives, polyurethane coatings, polymer cement concrete, air and water permeable surfaces in footpath construction etc.
S 0,2-0,5T	0,2 - 0,5	0,37	41	65	Industrial flooring on resin base, acid and alkali resistant drain-pipes and conduits, street marking paints, fillers, surfacer and sealing mass, coatings for corrosion protection, abrasives, polyurethane coatings, polymer cement concrete, air and water permeable surfaces in footpath construction etc.

d - D ≙ grain size distribution
d₅₀ ≙ median grain size
All dry sands (T) can be supplied as blended grades. Schlingmeier Quarzsand silica sands are processed natural raw materials. All data are approximate values and do not represent any warrant.

Please note:

It is the duty of our contractual partner to check the suitability of the product for his specific application. Nonetheless, our General Terms and Conditions apply.